Motorway Stud Lights R1 Features:

•High brightness America brand led light with 100000 hours of working time.

•USA brand solar panel. 22% high conversion rate. Fast charge rate.

•Japan brand casting Al material. Motorway Stud Lights bears more pressure.

•Most quality Epoxy resin glue to fix the Motorway Stud Lights, making sure of solar power charge.

•Philips PC board, safe and stable. Long-time warranty for Motorway Stud Lights.

•The leader of Motorway Stud Lights. Load capacity:>30T(can be installed in the middle of the road)

Aluminum Motorway Stud Lights Parameters：

Aluminum Motorway Stud Lights R1 Application of Aluminum Motorway Stud Lights R1:

♥Schools and hospitals

♥Highways

♥High traffic areas

♥Walking paths

♥Transit stations

♥Parks and campuses

♥Urban Road

How to install Aluminum Motorway Stud Lights with shank R1:

1. Carefully mark the distance between the placement of the Motorway Stud Lights. To prevent adverse effects on the ground, use appropriate tools, such as core drills, which have a diameter of 35mm and a depth of 55mm.
2. Remove all debris from the mounting hole.
3. Pour epoxy resin into the hole according to the manufacturer’s instructions.
Make sure that the mounting holes are straight. Make sure that the mounting hole is large enough to allow epoxy resin to surround the Motorway Stud Lights.
4. Adjust the lighting surface of the Motorway Stud Lights to the desired viewing angle.
5. Make sure that the epoxy resin adheres evenly to the mounting hole and the Motorway Stud Lights. Make sure that the bottom of the Motorway Stud Lights is securely mounted on the mounting surface to ensure that zero “surface floating” occurs. (Space between the installation sign and the bottom of the Motorway Stud Lights).
6. After curing the LED Motorway Stud Lights for 6-8 hours, remove the installation of the isolation facility.